- Inform Supervisors of Unsafe Conditions. …
- Use Equipment, Machines, and Tools Properly. …
- Wear Safety Equipment (PPE) …
- Prevent Slips and Trips. …
- Keep Work Areas and Emergency Exits Clear. …
- Eliminate Fire Hazards. …
- Avoid Tracking Hazardous Materials.
Manufacturing Safety Employee Video
Why is safety important in manufacturing?
One of the most crucial aspects of a manufacturing career is safety. For your own wellbeing as well as that of those around you, such as coworkers, supervisors, and members of the public, it is imperative that you maintain workplace safety. Commitment to safety may also be a key factor in career development procedures like performance reviews and evaluations. Safety regulations may occasionally be governed by law and must be followed as such. This might be especially true in the manufacturing sector, where using complicated machinery and heavy equipment is common practice.
14 safety tips for manufacturing
Here are 14 suggestions you can use to help you prioritize safety in your manufacturing career:
1. Support a culture of safety
Every person feels responsible for acting safely and promotes safe behavior among team members in a culture of safety. Leaders in a manufacturing environment can promote a culture of safety by stressing the value of following safety regulations and by communicating the importance of following safety procedures. A company culture that prioritizes safe workplace behaviors can be developed with the help of initiatives like safety incentives.
2. Implement and attend safety training
Giving employees safety training can be an effective way to make sure every member of your team has the knowledge they need to stay safe. If you are in a position of leadership, make sure to give people plenty of opportunities to learn about safety. Attend safety trainings when they are offered if you are a team member, and pay attention to the crucial information they contain. Additional training in areas like equipment use and manufacturing best practices can help promote workplace safety.
3. Hold regular safety meetings
In the manufacturing environment, safety meetings can reiterate key points covered in safety trainings. Think about scheduling safety meetings on a regular basis, like weekly, biweekly, or monthly. You could use these meetings to highlight a specific safety topic, go over visible safety risks, and engage team members in conversation to encourage their commitment to safe work practices.
4. Communicate effectively
Positive safety outcomes can be ensured by having open lines of communication within an organization, between team members and supervisors, and with the general public. Make sure to alert your supervisor right away if you notice a safety issue in your manufacturing position so they can take appropriate action. To reduce risks to visitors’ safety, such as customers and clients, communicate with colleagues about safety and keep open lines of communication with the public.
5. Prioritize organization
Because it’s simpler to maneuver through physical spaces and locate safety equipment quickly in a clean environment, an organized workplace is frequently a safer one. Spend time tidying up a workspace before leaving it to prioritize organization and cleanliness. Try setting aside a certain amount of time each day or shift for cleaning and organizing the manufacturing space’s workspace if you’re in a leadership position.
6. Follow important safety procedures
Maintaining safety in a manufacturing environment involves a number of key practices. The time spent doing this each time you finish a task can help your organization meet its safety goals.
7. Use equipment correctly
Specialized tools, equipment, and facilities are frequently used in manufacturing work environments, and they must be used properly to ensure operator safety. Make sure you and, if applicable, your team members receive the proper instruction in how to use the equipment. Make sure to mandate and reinforce proper equipment procedures for your team members as well, if you are in a position to do so.
8. Wear personal protective equipment
Personal protective equipment, or PPE, is frequently required for those who operate manufacturing equipment or work close to such equipment to ensure their safety while doing so. PPE examples include hard hats, safety goggles, respirators, and any other tools necessary for workplace personal safety. In addition to being a best safety practice, wearing PPE is frequently required by the workplace and outside regulatory bodies.
9. Monitor your environment
Pay close attention to your surroundings to spot and eliminate any potential hazards for accidents. To avoid slips and falls, you could, for instance, check the floor for moisture and dry any spills. Before leaving the area if a potential hazard necessitates a supervisor’s attention, be sure to alert others to the hazard.
10. Prevent falls
A safety concern in manufacturing workplaces can be slips and falls. Keep an eye out for potential trip hazards, such as wet floors or objects underfoot. Addressing them promptly can help keep you and others safe.
11. Practice fire prevention
Make sure to educate yourself as much as you can about preventing fires in manufacturing environments. Since these particular risks are frequently environment-specific, become familiar with the particularities and rules of your own facility. To help prevent accidents, accurately and consistently adhere to the fire safety protocol.
12. Be aware of hazardous materials
Some manufacturing environments may incorporate hazardous materials. Be aware of these particular risks in your environment and take any safety measures that your facility’s policies require. Learn as much as you can about the potentially dangerous materials you may come into contact with, as well as how to avoid accidents and deal with them if they do happen.
13. Lift appropriately
Lift correctly at all times as improper lifting can occasionally result in injury. To learn how to lift objects that are heavy or awkward, look for training or information that is industry-specific. Then, follow the instructions provided by your organization and the appropriate authorities. To prevent injury, seek out more information about safe lifting from a safety leader or supervisor.
14. Take breaks when necessary
Preventing fatigue can also help prevent workplace injuries and accidents. When breaks are required, try stretching or shifting positions to make the most of them if your circumstances allow it. When possible, try to get enough sleep the night before a manufacturing shift so you can react quickly to environmental hazards.
What are the 7 safety tips?
- Use the proper tool for the job.
- Always wear the proper PPE for the work task.
- Never work on live equipment.
- Make sure chemicals are properly labeled and stored.
- Communicate safety hazards to other personnel.
- Stop work when needed to address hazards.
What are the 10 safety tips?
- Use tools and machines properly. …
- Be aware of your surroundings. …
- Be safe in the cold weather. …
- Follow procedure, don’t take shortcuts. …
- Wear your protective gear. …
- If you see unsafe conditions, let a supervisor know. …
- Take breaks. …
- Stay sober.
What are 5 safety guidelines?
- Your safety is your personal responsibility.
- Always follow the correct procedures.
- Never take shortcuts.
- Take responsibility and clean up if you made a mess.
- Clean and organize your workspace.
- Make sure the emergency exits and equipment are visible and accessible.
- Be alert and awake on the job.
What are safety tips in the workplace or industry?
- Always Report Unsafe Conditions. …
- Keep a clean workstation. …
- Wear protective equipment. …
- Take breaks. …
- Don’t skip steps. …
- Stay up to date with new procedures or protocols. …
- Maintain proper posture. …
- Offer guidance to new employees.