data domain interview questions

These EMC interview questions have been created specifically to familiarize you with the types of questions you might encounter during your EMC interview. Good interviewers, in my experience, rarely have a specific question in mind for you to answer during the interview. Instead, questions usually begin with a basic idea of the topic and develop from there based on further discussion and your response. We’ll go over the top EMC interview questions and their in-depth responses. EMC scenario-based interview questions, EMC interview questions for newcomers, and EMC interview questions and answers for experienced candidates will all be covered.

5) How do hosts of open systems access storage in Fiber Channel SANs?

6) A Symmetrix read cache miss operation involves several steps. The host sends a read request as the initial step. What is the next step?.

21) How many octets comprise the network portion of a standard Class C IPv4 address?

25) Which Symmetrix connectivity options are compatible with Windows Hosts and Open Systems?

Which of the following enables you to use the Storage Provisioning Services for ControlCenter Automated Resource Manager?

Ans: Only the most recently used pages are flushed when the cache is flushed to the driver during I/O.

What is EMC Data Domain? In 4 minutes a complete introduction

Interviews for Top Jobs at Data Domain

Marketing Interview

Application

I applied through an employee referral. I interviewed at Data Domain (Santa Clara, CA)

Interview

Fairly straight-forward when HR contacted to set-up for an in-person interview. Once I showed up, a personnel introduced herself but wasn’t clear what her role was, asked a few basic questions about my general work experience. After a brief conversation, she got up to go get the hiring manager. Fifteen minutes went by (and I was beginning to get worried that they had forgotten about me in the conference room). Finally a guy shows up and unexpectedly told me that there has been a mistake–the job was no longer available. In utter shock, I said “Oh, well that’s strange.” In which he obnoxiously replied “Not really–not in this day and age!” I thanked him and left. He provided no apologies, no display of fault or embarrassment.

Interview Questions

  • No questions were asked

Software Engineer Interview

ApplicationI applied through a recruiter.  The process took 2 days. In June 2010, I had a job interview at Data Domain (Sunnyvale, California). The interview was conducted via phone and on site, and I was asked a variety of unrelated questions. Interviewers appeared to find it difficult to conduct interviews while away from their desks. It turns out that they are only looking to hire expensively overqualified individuals. Due to NDA can’t really mention the questions asked.

Tips for data backup interviews

Following are some pointers to help you do well in data backup interviews:

Can you conduct a full backup and can you guide us through your process?

Conducting complete backups of important data is a crucial duty of data backup positions. Employers frequently search for a specific response to this question because it pertains to a standard procedure for data backup professionals. It is crucial that you confidently and thoroughly describe the process you adhere to.

Yes, I have performed a number of full backups over the course of my career. You can create a complete backup by backing up your operating system, all of your data, and the log and control files that make up your database and parameter.

General data backup interview questions

In data backup interviews, interviewers may inquire about your work style, personality, and goals using the following general questions:

These sample questions are straightforward and fundamental in nature, simulating the style of the actual Dell EMC E20-585 exam questions. We recommend preparing with our Premium Dell EMC Data Domain Specialist Certification Practice Exam to evaluate your readiness and performance with real-world scenario-based questions. When you attempt to answer questions with real-world scenarios, you frequently run into problems that provide opportunities for improvement.

DCS-SA Dumps, E20-585 Dumps, E20-585 PDF, DDCS-SA VCE, Dell EMC E20-585 VCE, Dell EMC DECS-SA PDFThe purpose of this Sample Question Set is to provide you with information about the Dell EMC Data Domain Specialist for Systems Administrator exam. These sample questions will make you very familiar with both the type and the difficulty level of the questions on the E20-585 certification test. To get familiar with real exam environment, we suggest you try our Sample Dell EMC Data Domain Specialist Certification Practice Exam. This sample practice exam gives you the feeling of reality and is a clue to the questions asked in the actual Dell EMC Certified Specialist – Systems Administrator – Data Domain (DECS-SA) certification exam.

EMC Interview Questions And Answers

I will use the formula:

(RAID Group IOPS / (Hard Drive Type IOPS)) + Large Random I/O adjustment + Hot Spares + System Drives = Approximate Total Drives Needed

Get EMC Training with Industry Oriented Topics By Real Time Experts

36) What does the control Center storage agent monitor?

Ans: CLARIION

37) When is a Symmetrix DMX’s Port Bypass Card used?

Ans: When the Disk Director fails

Which Celerra data replication option offers an over-the-IP point-in-time filesystem copy?

Ans: Celerra Replicator

39) What does ISL aggregation do?

A higher availability is made possible by allowing traffic distribution over the combined bandwidth of two or more ISLs.

40) What are features of Celerra Replicator?

Ans: Synchronous data recovery, Point-in-time copy over an IP network

41) What protocol does open systems hardware use to access Fibre Channel SAN storage?

Ans: SCSI

Which NetWorker host executes the bootstrap save set backup? 42)

Ans: Server during a server-initiated backup

43) On a Symmetrix system, what application is used to create logical volumes?

Ans: Control Center Symmetrix Manager

44) Which Symmetrix connectivity options are compatible with hosts running mainframe software?

Ans: ESCON and FICON

45) Which control center view gives users a single graphical representation of the entire environment, complete with threshold charts and recommended changes?

Ans: At A Glance

46) Which set component must be present for write caching in a CLARIION array to be enabled?

Two power sources, two storage processors, two LCC cards, and at least one standby power source are the answers.

47) What are the advantages of zoning in a SAN?

Ans: Security at the switch port level

48) What is a characteristic of enterprise directors?

Ans: Fully redundant components

49) Which java based interface manages standalone MDS-Series switches?

Ans: Fabric manger

50) Block level storage over IP is accessed by open system hosts using which protocol?

Ans: ISCSI

51) What features distinguish a Centera Content Address?

Ans: Globally unique

52) What function does the Internet Control Message Protocol, or ICMP, serve?

Ans: Sends administrative information between network devices

53) In a CLARiiON storage array, what function do storage groups serve?

Ans: LUN masking.

54) What Is Lun Masking?

An authorization procedure called LUN (Logical Unit Number) Masking makes a LUN available to some hosts but unavailable to others. The HBA (Host Bus Adapter) level is where LUN masking is primarily implemented. This level of LUN masking implementation leaves it open to attacks that could compromise the HBA. Some storage controllers also support LUN Masking.

55) Why Do We Need Lun Masking?

Ans:

  • LUN Masking is important because Windows based servers attempt to write volume labels to all available LUN’s. This can render the LUN’s unusable by other operating systems and can result in data loss.
  • Device masking lets you control your host HBA access to certain storage arrays devices. A device masking database, based in the storage arrays unit, eliminates conflicts through centralized monitoring and access records. Both HBA and storage arrays director ports in their Channel topology are uniquely identified by a 64-bit World Wide Name (WWN). For ease of use, you can associate an ASCII World Wide Name (AWWN) with each WWN.
  • data domain interview questions

    FAQ

    What is Data Domain used for?

    By removing storage silos for backup and archive data as well as the associated overhead, Data Domain offers the ability to consolidate backup and archive data on the same infrastructure.

    What is Data Domain called now?

    Data domain (data governance) By the way, you may come across the terms “subject area” or “data concept” when referring to a data domain. Within data governance, they both refer to the same thing.

    What is Ddboost in Data Domain?

    By using DD Boost, the backup server or application client can send only distinct data segments to the PowerProtect DD systems over the network. As a result, 80 to 98 percent less data is transferred across the network.

    What is your Favourite Domain interview questions?

    Interview Questions
    • Favourite product. Answer Question.
    • What makes a good metric? Answer Question.
    • How does Domain make money. Answer Question.
    • Tell me about a feature you introduced at your previous company, and what would you have changed?

    Related Posts

    Leave a Reply

    Your email address will not be published. Required fields are marked *