Top 30 Nexus interview questions and answers

Frequently asked questions at the NEXUS interview are: “Why do you want the Nexus card?” “How often do you plan to use the NEXUS pass?” “Where do you think you will travel to in Canada /the States?”

Q1. What is NEXUS?

NEXUS is a bi-national, Canada-United States program for pre-approved, low-risk travelers entering Canada or the United States (U.S.) at designated air, land and marine ports of entry.

The program enables its members to enter either country more quickly and easily by using automated self-serve kiosks in the air mode of travel, dedicated lanes in the land mode of travel, and by calling Telephone Reporting Centres (TRCs) prior to arrival in the marine mode of travel.

Q2. Is there a fee involved to apply for NEXUS?

Yes. There is a non-refundable processing fee of $50 in Canadian or U.S. funds.

Q3. What is iris recognition biometric technology?

Iris recognition biometric technology identifies the unique patterns of the iris (the coloured ring around the pupil of the eye). The technology reads each of the 266 unique characteristics in the human iris. It is safe, secure and non-invasive.

Q4. What is the size of a NEXUS card?

A NEXUS card is approximately the same size as a standard credit card or driver’s licence.

Q5. Where is NEXUS in the air mode available?

NEXUS in the air mode is available at 8 locations when entering Canada.

In addition, please note that a trusted traveller kiosk is also available at Billy Bishop Toronto City Airport, for incoming flights only for use by members of NEXUS and CANPASS Air.

Q6. Where is NEXUS in the land mode available?

NEXUS in the land mode is available at 21 locations when entering Canada

Q7. Where is NEXUS in the marine mode available?

NEXUS in the marine mode is available at approximately 450 locations when entering Canada.

Nexus 7000 has a loop prevention method that drops traffic traversing the peer link (destined for a vPC peer link) when there are no failed vPC ports or links. The rule is simple: if the packet crosses the vPC peer link, it may not go out any port in a vPC even if that vPC does not have the original VLAN.

Q9. Is there a tool available for configuration conversion on Cisco 6500 series to the Nexus platform?

Cisco has developed the IOS-NXOS Migration Tool for quick configuration conversion on Cisco 6500 series to the Nexus series OS.

Q10. What are orphan ports?

Orphan ports are single attached devices that are not connected via a vPC, but still carry vPC VLANs. In the instance of a peer-link shut or restoration, an orphan port’s connectivity may be bound to the vPC failure or restoration process. Issue the show vpc orphan-ports command in order to identify the impacted VLANs.

Q11. What is the minimum NX-OS release required to support FCoE in the Nexus 7000 Series Switches?

FCoE is supported on Cisco Nexus 7000 Series systems running Cisco NX-OS Release 5.2 or later.

Q12. What Are Orphan Ports?

Orphan ports are unmarried attached devices that aren’t connected through a vPC, however nonetheless carry vPC VLANs. In the example of a peer-hyperlink close or recovery, an orphan port’s connectivity may be certain to the vPC failure or recovery method. Issue the show vpc orphan-ports command with a purpose to perceive the impacted VLANs.

Q13. On A Nexus, Is The Metric-kind Keyword Not Available In The “default-facts Originate” Command?

On a Nexus, use a course-map command with a fixed clause of metric-type type-[½] a good way to have the same functionality as in IOS the use of the default-statistics originate always metric-type [½] command.

For example:

transfer(config)#course-map STAT-OSPF, permit, collection 10switch(config-route-map) #suit interface ethernet 1/2switch(config-course-map) #set metric-kind outside internal type type-2

Q14. What Is Vpc And What Are Its Benefits?

Virtual PortChannel (vPC) is a port-channeling idea that extends hyperlink aggregation to 2 separate physical switches.

Benefits of vPC encompass:

Utilizes all available uplink bandwidth
Allows the introduction of resilient Layer 2 topologies primarily based on hyperlink aggregation
Eliminates the dependence of Spanning Tree Protocol in Layer 2 access distribution layer(s)
Enables obvious server mobility and server excessive availability (HA) clusters
Scales to be had Layer 2 bandwidth
Simplifies community layout
Dual-homed servers can operate in active-lively mode
Faster convergence upon hyperlink failure
Improves convergence time when a unmarried tool fails
Reduces capex and opex

Q15. What Does The %eem_action-6-tell: Packets Dropped Due To Ids Check Length Consistent On Module Message Mean?

Cisco NX-OS supports Intrusion Detection System (IDS) assessments that validate IP packets to make certain right formatting. This is an enhancement beginning in five.X.

The EEM message is being logged due to the fact a packet is obtained with the aid of the switch where the Ethernet body length is shorter than the predicted length to include the IP packet duration plus the Ethernet header. The packet is dropped by means of the hardware due to this situation.

In order to affirm that the IDS drops befell because the closing switch reboot, difficulty the show hardware forwarding ip verify module [#] “.

Q16. How Many Syslog Servers Can Be Added To A Nexus 7000 Series Switch?

The maximum range of syslog servers configured is three.

Q17. Is Nexus 7010vpc Feature (lacp Enabled) Compatible With The Cisco Asa Etherchannel Feature And With Ace 4710 Etherchannel?

With recognize to vPC, any tool that runs the LACP (that’s a wellknown), is like minded with the Nexus 7000, which include ASA/ACE.

Q18. Which Nexus 7000 Modules Support Fibre Channel Over Ethernet (fcoe)?

The Cisco Nexus 7000 Series 32-Port 1 and 10 Gigabit Ethernet Module assist FCoE. The part variety of the product is N7K-F132XP-15.

Q19. Wherever Is Nexus within the Air Mode Available?

NEXUS within the air mode is on the market at eight locations once getting into Canada.

In addition, please note that a trusty traveler booth is additionally accessible at Billy Bishop provincial capital town field, for incoming flights just for use by members of NEXUS and CANPASS Air.

Nexus 7000 incorporates a loop hindrance methodology that drops traffic traversing the peer link (destined for a vPC peer link) once there aren’t any failing vPC ports or links. The rule is simple: if the packet crosses the vPC peer link, it should not leave any port in a very vPC although that vPC doesn’t have the first VLAN.

Q21. Is There A Tool accessible For Configuration Conversion On Cisco 6500 Series To The Nexus Platform?

Cisco has developed the IOS-NXOS Migration Tool for fast configuration conversion on Cisco 6500 series to the Nexus series OS.

Configure the vPC Keepalive Link and Messages

This example demonstrates a way to assemble the destination, supply informatics address, and VRF for the vPC-peer-keepalive link:

switch# assemble terminal

switch(config)# feature vpc

switch(config)# vpc domain a hundred

switch(config-vpc-domain)# peer-keepalive destination 172.168.1.2 source

172.168.1.1 vrf vpc-keepalive

Create the vPC Peer Link

Q23. What will The îm_action-6-inform: Packets born thanks to Ids Check Length Consistent On Module Message Mean?

Cisco NX-OS supports Intrusion Detection System (IDS) checks that validate informatics packets to confirm correct information. this is often Associate in Nursing sweetening starting in five.x.

The EEM message is being logged as a result of a packet is received by the switch wherever the LAN frame size is shorter than the expected length to incorporate the informatics packet length and the LAN header. The packet is born by the hardware thanks to this condition.

Q24. What number Syslog Servers is additional To A Nexus 7000 Series Switch?

The maximum range of syslog servers designed is three.

What number Ospf Processes is Run in a very Virtual Device Context (vdc)?

There is up to four (4) instances of OSPFv2 in a very VDC.

Q25. On A Nexus, is that the Metric-type Keyword Not offered within the “default-information Originate” Command?

On a Nexus, use a route-map command with a collection clause of metric-type type-[½] so as to possess an equivalent practicality as in IOS exploitation the default-information originate forever metric-type [½] command.

For example:

switch(config)#route-map STAT-OSPF, permit, sequence ten

switch(config-route-map)#match interface local area network 1/2

switch(config-route-map)#set metric-type internal

Nexus 7000 has a loop prevention method that drops traffic traversing the peer link (destined for a vPC peer link) when there are no failed vPC ports or links. The rule is simple: if the packet crosses the vPC peer link, it may not go out any port in a vPC even if that vPC does not have the original VLAN.

Q27. Is There A Tool Available For Configuration Conversion On Cisco 6500 Series To The Nexus Platform?

Cisco has developed the IOS-NXOS Migration Tool for quick configuration conversion on Cisco 6500 series to the Nexus series OS.

Q28. On A Nexus, Is The Metric-type Keyword Not Available In The “default-information Originate” Command?

On a Nexus, use a route-map command with a set clause of metric-type type-[½] in order to have the same functionality as in IOS using the default-information originate always metric-type [½] command.

For example:

switch(config)#route-map STAT-OSPF, permit, sequence 10switch(config-route-map) #match interface ethernet 1/2switch(config-route-map) #set metric-type {external | internal | type-1 | type-2}

Configure the vPC Keepalive Link and Messages

Q30. How Many Syslog Servers Can Be Added To A Nexus 7000 Series Switch?

The maximum number of syslog servers configured is 3.

FAQ

What questions do they ask at a NEXUS interview?

Frequently asked questions at the NEXUS interview are: “Why do you want the Nexus card?” “How often do you plan to use the NEXUS pass?” “Where do you think you will travel to in Canada /the States?”

What is needed for NEXUS interview?

You should take the following supporting documentation with you to your NEXUS interview: Passport, Birth Certificate, Permanent Resident Card, US or Canadian Visas – any document listed on your application, which was used to verify that you are a Canadian or US citizen or permanent resident.

How long is the wait for NEXUS interview?

The complete process to interview and APPROVAL can often take more than 6 months but an interview must be scheduled or completed at an enrollment center within 12 months of “Conditional Approval” or your application will be cancelled. How long will I have to wait for conditional approval?

Is NEXUS still doing interviews?

NEXUS and FAST interviews have resumed at enrolment centres in the U.S. Canadian NEXUS and FAST enrolment centres remain closed. All applicants, including Canadian citizens and Permanent Residents, wishing to schedule interviews can do so at their nearest U.S. enrolment centre through the Trusted Traveller portal.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *