Anyone getting ready for interviews with Brocade, Qlogic, or Adaptec will benefit from this set of Fiber channel SAN interview questions and answers. For better understanding, one should continuously practice the entire set of questions and answers for two to three months.
1. Which one of the following firms produces FC switches? a) Brocade b) Quantum c) NetApps d) Medusa View AnswerAnswer: a Explanation: None
2. An FC analyzer can be used to: a) Capture corrupted FC frames; b) Determine network bandwidth usage; c) Measure I/O performance; or d) None of the above.
3. Use a) HBA b) FC switch c) Repeaters d) Media Interface Adapters to extend a fiber’s range. View AnswerAnswer: c Explanation: None
4. View AnswerAnswer: a Explanation: None GBIC, GLM, and SFPs perform a) Similar tasks b) Different tasks c) Depends on their usage d) Any of the mentioned tasks
5. Which of the following firms produces FC HBA? d) All of the aforementioned firms View AnswerAnswer: d Explanation: None
Steps Of Zoning in Brocade SAN Switch & important terms – Part-2 | Most common interview question
Brocade SAN Switch Interview Questions Theory
A fabric is a collection of interconnected SAN switches in a storage area network.
What is the Principal switch?
The principal switch, which is also known as a core switch, gives the devices connected to it a domain ID. Additionally, the principal switch is in charge of synchronizing time across all switches in a Fabric.
Interviews for Top Jobs at Brocade
I had the opportunity to meet with every member of the team and discuss my experience and the benefits I expected from working for the organization. I had a great understanding of the team and what my typical day would be.
Be the first to find this interview helpful
I applied online. I interviewed at Brocade
One-hour phone interview, five rounds of on-site selection, programming, situation, and human resources. Totally it was nice experience. They ensured i was comfortable. Situation round expected thought process rather than straight answer.
Be the first to find this interview helpful
Static and dynamic link aggregation are the two primary modes. The less complex of the two is static, which only needs you to manually configure which ports will be grouped together. Because it can automatically configure port groups based on traffic patterns, dynamic is a little more complicated but offers greater flexibility. Dynamic link aggregation is my preferred method because it requires less setup and upkeep.
Multiple servers can connect to a storage area network (SAN) using a SAN switch. A storage area network, or SAN, is a fast network created for hard drives and tape drives. Multiple servers can share the same storage resources thanks to a SAN switch, which can enhance storage performance and efficiency.
When deciding which HBA cards should be installed with which servers, there are a few factors to consider. The first is the server type because some server types and some HBA cards are incompatible. The second factor is the maximum number of HBAs that the server can accommodate because you must be careful not to overload the server with HBAs. The third is the HBA cards’ compatibility with the SAN switch, as you must ensure that they can connect to the SAN switch.
While managing traffic in a large-scale network, there are a few potential difficulties to be aware of. First, there may be a lot of traffic, and it may be challenging to keep track of everything. The second is that it might be challenging to prioritize all of the different types of traffic that might be present. The third is that it might be challenging to keep all the devices in sync when they are trying to access the same resources.
Quality of Service, or QoS, is a collection of tools and methods used to control and direct network traffic in order to guarantee that mission-critical applications have access to the resources they require to operate as intended. On a SAN switch, QoS can be implemented by utilizing features like traffic shaping and rate limiting to regulate traffic flow and give some types of traffic priority over others.
FAQ
How do I know what model my Brocade switch is?
The switchshow command or the Brocade serial number can be used to identify specific Brocade switch models.
What is the interview questions in switching?
- What is a Switching ?
- What is a Switch ?
- What distinguishes flow control from broadcast storm control?
- What is difference between Switch and Hub ?
- What is Difference between Switch and Bridge ?
- What are functions of a Switch ?
What is Brocade SAN switch?
Brocade switches for entry-level and mid-range SANs provide the tools to automate SAN management tasks and optimize NVMe storage, with a high port density building block and a management platform to support application, data, and storage growth.
How do I access my Brocade SAN switch GUI?
- To configure the IP address, log in to the Brocade SAN Switch using the default credentials of admin and password. Caution: The default password for “root” has not been changed.
- Install the latest JAVA version.
- Add the SAN Switch’s IP Address to the Java Exception Site List.
